DRAGON plastic horizontal centrifugal Mag drive centrifugal pumps series TYPHOON vertical centrifugal pumps
are high performance pumps operated are made of Polypropylene and PVDF, and are high performance pumps for fixed
by a direct-drive electric motor for fast are suitable for high corrosive liquids. installations with the pump immersed
fluid transfer and drainage with Thanks to the innovative mag drive system, directly in the tank.
flow-rates ranging from 6 to 40 m3/h. COMPASS series reduce the risks
The special semi-opened impeller design of leakage and emissions and the These pumps are used to quickly empty
allows continuous pumping even with maintenance costs. the fluid, with flow rates ranging from 6
dirty fluids with apparent viscosity to 40 m3/h. The special semi-opened
up to 500cps. and small suspended The transmission of the motion occurs impeller design, allows continuous
solids. through magnetic joints without any pumping even with dirty fluids
DRAGON centrifugal pumps feature mechanical seal and this design guarantees with apparent viscosity up to 500cps.
a solid pump casing and a lantern for the maximum safety and efficiency and small suspended solids.
connecting the electric motor and The pumped liquid has to be clean TYPHOON are electric motor driven
inspection of the mechanical seal. and without solids in suspension. pumps that, through a flexible coupling,
The semi-opened impeller is fitted transmitting the rotation to the shaft
to the pump shaft that is integral and the impeller, due to centrifugal
with the drive shaft of the electric motor. effect, creates a suction on the
The shaft mechanical seal is housed central duct and a delivery on the
at the rear of the impeller. peripheral tube.
MAIN FEATURES: MAIN FEATURES:
Casing and impeller in PP and PVDF Casing and impeller in PP and PVDF
O-ring in EPDM and VITON O-ring in EPDM and VITON
Lenght from 250mm to 1400mm Lenght from 250mm to 1400mm
Max delivery head 25 mts Max delivery head 25 mts
Max flow - Rate: 40 m3/h Max flow - Rate: 40 m3/h
Temperature: from -20 °C to + 95°C Temperature: from -20 °C to + 95°C
Max viscosity: 500 CPS Max viscosity: 500 CPS
Electric motors from 0,37 Kw up to 5,5Kw Electric motors from 0,37 Kw up to 5,5Kw
Specific Gravity up to 1.9 Specific Gravity up to 1.9
Casing and impeller in PP and PVDF FLUIMAC coupling is the flexible and
O-ring in EPDM and VITON homokinetic coupling that assures
Single Mechanical Seal the best performance in relation to
Max delivery head 25 mts the physical space occupied in its class.
Max flow - Rate: 40 m3/h It has a very compact design and
Temperature: from -20 °C to + 95°C allows safe power transmission by
Max viscosity: 500 CPS absorbing peak loads and torsional
Electric motors from 0,37 Kw up to 5,5Kw vibrations. Moreover, the elastic
Specific Gravity up to 1.9 design of the polyurethane gear ring
compensates for angular and radial
misalignments and also absorbs
small shaft length variation.